Monday, 11 August 2014

How to Fix Error U053 and 1405 in Canon MX Series Printers



1405/ U053 - Orange light blinking 5 times

Description:

Faulty data of the print head.

Resolution:




Fixing the Canon ‘Check ink U051, U052, U053 or U059′ Error Message

Your Canon printer will the ‘Check ink U051, U052, U053 or U059′ code when it is having trouble recognising either one of the ink cartridges installed. The official Canon description for these errors is either “The FINE cartridge is not installed”, ”The FINE cartridge is not installed properly” or  “Appropriate FINE cartridge is not installed”. A FINE cartridge is any modern Canon cartridge produced that has a printhead built into the bottom of the cartridge. Whilst only Canon originals carry the ‘FINE’ branding any functioning compatible, remanufactured or refilled cartridge can be used to resolve these errors.

How do I clear the U051, U052, U053 or U059 error message?

As described above these codes can appear for a couple of reasons. “The FINE cartridge is not installed” indicates that your printer cannot recognise one or more of the installed cartridges at all and “Appropriate FINE cartridge is not installed”, would indicate that an incorrect cartridge is installed. To resolve any of these Canon error messages please follow the steps below until the message disappears:
·        Open up your printer and ensure that both the black and the colour ink cartridge are installed. Your Canon printer needs both of these cartridges installed to print, even if you are only planing on printing in black. For more information on why this is necessary click here.
·        Check to make sure your cartridges carry the correct codes. The label of the cartridge should carry codes matching or at least similar to PG-37, PG-40, PG-50, PG-510, PG-512, PG-540 or PG-540XL for the black and CL-38, CL-41, CL-51, CL-511, CL-513, CL-541 or CL-541XL for the colour. Which of these codes is correct for your printer will depend entirely upon the model of the machine. If there is no indication on the printer as to which cartridges are needed please check your user manual for confirmation.
Check the cartridges contacts are clean and un-obscured. Your Canon printer uses a series of metallic contacts on the front of the cartridge to communicate with it when installed. If these contacts are dirty or covered by protective strips etc. then your printer will not be able to use the cartridge. I recommend removing the cartridge from your printer and wiping down the contacts with a piece of kitchen tissue (or another non-fibrous tissue) to ensure no dirt, ink or natural oils are preventing your printer from reading the cartridge. When finished your cartridges contacts should appear as below.

Friday, 14 December 2012

How to resolve error 6A80 on an MP990 in canon printer


6A80

There are several reasons for 6A80 to appear. This article provides you recommendations with links to clear the message.

To clear the , click on the link to open the article and get detailed instructions.

If the above recommendations do not help you resolve the , the printer will need to be repaired.

Call us +1-855-517-2433 (Toll Free)

Friday, 29 June 2012

How to Manually Cleaning the Printer Head in Canon Printer


Canon printers have a removable printer head that holds the ink cartridges. It is important to print a few pages in both black and color at least once per week in order to keep the ink flowing and prevent clogging.
If the printer head nozzles are blocked or dried out you will need to dissolve the dried ink. An inkjet nozzle has a diameter of about 45 microns which is about 1/2 the width of a human hair. Normally you can clear up minor clogs and streaking by running the cleaning cycle found in your printer's software utility.

Canon printers have a removable printer head that holds the ink cartridges. It is important to print a few pages in both black and color at least once per week in order to keep the ink flowing and prevent clogging.
If the printer head nozzles are blocked or dried out you will need to dissolve the dried ink. An inkjet nozzle has a diameter of about 45 microns which is about 1/2 the width of a human hair. Normally you can clear up minor clogs and streaking by running the cleaning cycle found in your printer's software utility.

Steps for Manually Cleaning thePrinter Head


Step 1 - Remove the ink tanks and printer head. Remove the ink tanks from the printer head (tank holder) and seal them in a zip lock or other sealable plastic bag. Set them aside, preferably propped upright.
Next remove the printer head (it snaps out). NOTE: You may want to wear latex gloves to help keep ink off your hands.

Step 2 - Soak the printer head. There are multiple suggestions on ways to clean the printer head and all have some variation on the following:
·         Get a small, shallow pan and lay down a layer or two of paper towels in the bottom of the container to protect the printer head circuitry from contact damage.
·         Heat up (via microwave) enough purified/bottled water to cover the paper towels. You can also use a 50/50 mixture of ammonia and distilled water (about a pint will do). Heat the mixture in the microwave for about a minute or so - it should NOT be boiling.
·         Slowly pour the water or mixture over the paper towels so that you have approximately 1/2 inch of liquid in the bottom of the pan.
·         Set the printer head into the container on top of the towels. You should see ink 'bleeding' out. Move the print head to several different spots (about a minute each spot) and shake gently. This will dissolve the ink clogs.
·         If the printer head is badly clogged let it soak for 3 to 4 hours or overnight. You can move it slightly to a different spot every hour or so.


Call Us +1-855-517-2433 (Toll Free)

Thursday, 28 June 2012

How to Install Canon Printers Without the Disks


Canon printers are more commonly used for personal computers, as opposed to commercial use. These particular printers usually come with installation disks that are used to install the hardware's software drivers on the computer, but it's easy to misplace those disks over time. Luckily, the Canon support site provides software drivers for Canon printers, allowing users to install the software without the disks. 

Solution

1 .Go to the official Canon Global website in your computer's Internet browser.

2 .Click the "Support <Drivers/Downloads>" tab along the left side of the Canon Global homepage. Select your region on the interactive map that appears on the right side of the tab options, and select the subregion where you are located.

3 .Select your product type, and click "Printers & Multifunction" to begin searching for your Canon product type. Click the product series that relates to your Canon printer.

4 .Scroll through the list of Canon printer models in the product series. Click the "Drivers & Software" link next to your Canon printer's thumbnail image. You will be redirected to the printer's product and overview page.

5 .Scroll down the Canon printer's product and overview page to the Drivers and Downloads section of the page. Click the "Select Your Operating System" drop-down bar. Select the name of your operating system, and click the red arrow to retrieve the software driver for your system.


Call Us +1-855-517-2433 (Toll Free)

How to Install a Canon Printer in Mac Classic



Mac Classic is any version of Mac that came before Mac OS X, but it usually refers to Mac OS 9 and Mac OS 8 since they were the most recent operating systems before OS X came along. While all Mac OS X computers have printer drivers installed on them, most Mac Classic computers do not. To install a Canon printer on Mac Classic, it must be compatible with Mac OS 9 or lower and have an install CD.

       Solution

1. Put the Canon printer install CD into your Mac and click the icon. Click on the "Install.pkg" to install the printer drivers on your Mac. Click "Continue" and then "Install."

2. Plug your Canon printer into an outlet and connect it to the Mac via the printer port or USB port. Turn the printer on.

3. Eject the disk from your Mac and open the "Chooser" in the Apple menu.

4. Choose the Canon printer's icon from the list and click on "Select a port."

5. Select the printer icon and click "Close." A new window will open prompting you to set up the printer.

6. Align your Canon printer following the directions on your screen and click "Close" when it is finished.

Tuesday, 5 June 2012

How to Connect a Printer using Bluetooth


Bluetooth is a powerful wireless technology that lets your computer discover and share devices. Connecting a printer using Bluetooth is simple.

            1 Make sure your printer is Bluetooth enabled. Some printers come this way (read the manual to verify) but others require adapters. Shop online or visit an electronics store to find an inexpensive Bluetooth printer adapter.
            2 Set up your adapter. All you need do is connect one end to your computer and the other end to your printer and it will install itself.

            3 Turn on the printer. Make sure it is connected to a working electrical outlet and the printer power is on correctly.
            4 Open Bluetooth devices on your PC. After installing your Bluetooth adapter, go to the control panel and open "Bluetooth Devices."
            5 Add printer automatically. This is less secure, but easier. From the options tab, make sure the options "Turn discover on" and "Allow Bluetooth devices to connect to this computer" are checked. Your printer and computer should then find each other automatically and begin working. If you'd rather not let other devices discover your computer, follow steps 6 and 7 instead.
            6 Add device manually. From the devices tab, select "Add Device" and run the installation wizard to find your printer.
            7 Use the "Add Printers" wizard. You can also add the printer by clicking "Start" and "Printers and Faxes" and then "Add a Printer." When the wizard pops up, select "Bluetooth printer" and Windows will search for your printer automatically.
!-- Start Alexa Certify Javascript -->