Showing posts with label Canon Pixma Support. Show all posts
Showing posts with label Canon Pixma Support. Show all posts

Monday, 29 May 2017

Remove foreign objects from rear tray - MG5120

Check for Obstructions in the rear tray

If paper does not reach the Paper Edge Sensor, the LCD will show [Rear tray.

There is no paper. Load paper and press OK].

Power off the printer.
Remove paper from the Rear Tray.
Look in the Rear Tray area for an obstruction. If there is any foreign material (such as a piece of metal or pen) inside the printer, after turning the printer off and removing the power cord from the outlet, remove the foreign material by hand, or with tweezers.
Open the scanning unit (printer cover) and confirm that there is no foreign material in the printer. If there is any foreign material, remove it.

Note:
Avoid touching inner parts.
Close the scanning unit (printer cover).


Note:
When closing the scanning unit (printer cover), be careful not to jam your finger.
Power on the printer and confirm that the printer operates normally. SeeMore ( )
Request for service
CALL US +1-855-517-2433 (TOLL FREE)

How to Troubleshoot a Canon Photo Inkjet Printer



Canon USA has an excellent technical support page, but before you seek out their help tries troubleshooting your Canon Photo Inkjet Printer on your own. There are a few basic steps you can do to troubleshoot a Canon Photo Inkjet Printer.

Instructions




Make sure the printer is set up correctly. The printer must be plugged into the wall, powered on and connected to a computer to function properly.
 
 
Check for error messages. Occasionally, a printer will spell out what's wrong with it with a pop- up window. Check the status light on the printer too and read the manual to see what it means.
    Checkfor paper\. Make sure the paper is loaded correctly and is not jammed. Look over the manual to see how to clear paper jams without damaging your printer further.
     
     
    Run a self-test. Many printers have a self-test feature that will help you pinpoint the problems. Operations will vary, consult the manual.
     
     
    Run adriver test. This is done from the printer's software. Before you print, you have the option to enter "Printer Properties." From there, find a "Maintenance" or "Cleaning" tab. Here, you can run a test page.
     
     
    Look over the test page. Bars, uneven patterns and white spots indicate dirty printheads. Faded or missing colors means its time to change a cartridge.
     
     
    Clean and align printheads. This can be done from the same maintenance page from which you ran the test page.
     
     
    Replace cartridges. When ink runs low, its time to replace the cartridge. Take note of the part number written on the cartridge and buy one just like it.
     
     
    Reinstallthe drivers. Try uninstalling the drivers and reinstalling from the disc that came with the printer. Or look for patches and updates on the Canon Web site.

    How to Troubleshoot Scanning on a Canon MX870



    The Canon PIXMA MX870 is an all-in-one inkjet printer capable of printing, sending and receiving faxes, and scanning documents. Somewhere along the line during ownership, you may run into problems while scanning. Most of these problems can be solved by either altering scan settings or by proper maintenance of the scanner. By tweaking the appropriate settings, you can get your built-in scanner up and running again
     Check theprinter. Make sure that the power cord is plugged in and that the printer is turned on. Make sure one end of the USB cable is firmly connected to the printer, and the other end is inserted into a working USB port on your computer.

    Check the document you are attempting to scan. If you do not have a quality document to begin with, you can't expect much from the final product. Above all, make sure that the document you are attempting to scan isn't too faded. Light markings, such as pencil, can be difficult to scan properly.


    Clean the glass of the scanner, along with the plastic plate above the scanner glass. Turn off and unplug your printer before cleaning, and then wipe down the scanner with a slightly damp, lint-free glass cleaning cloth. Make sure that the cleaned areas are completely dry before turning the printer back on.

    Increase the resolution on the scanner. You can access the resolution settings in the "Scanning Resolution" dialog box, which can be found under the "Scan Settings" header. If your scanning resolution is low, your image may come out looking blocky and may appear out-of-focus.

    Open the ScanGear tool on your computer. Click the "Preferences" button in the top-right corner of the window. Click the "Color Settings" tab. Normally, you should set the color settings to "Recommended." However, if the colors in your document are not scanning properly, try switching to the "Color Matching" setting.

    Open the ScanGear tool on your computer. Open the "Advanced Mode" tab. From here, you can make more detailed changes to how your document is scanned. For example, if you are having a problem with dust and scratches appearing in your scanned document, alter the "Reduce Dust and Scratches" setting. Or, if stripes are appearing across your document, turn on Descreening.

    Friday, 14 December 2012

    How to resolve error 6A80 on an MP990 in canon printer


    6A80

    There are several reasons for 6A80 to appear. This article provides you recommendations with links to clear the message.

    To clear the , click on the link to open the article and get detailed instructions.

    If the above recommendations do not help you resolve the , the printer will need to be repaired.

    Call us +1-855-517-2433 (Toll Free)

    Friday, 29 June 2012

    How to Manually Cleaning the Printer Head in Canon Printer


    Canon printers have a removable printer head that holds the ink cartridges. It is important to print a few pages in both black and color at least once per week in order to keep the ink flowing and prevent clogging.
    If the printer head nozzles are blocked or dried out you will need to dissolve the dried ink. An inkjet nozzle has a diameter of about 45 microns which is about 1/2 the width of a human hair. Normally you can clear up minor clogs and streaking by running the cleaning cycle found in your printer's software utility.

    Canon printers have a removable printer head that holds the ink cartridges. It is important to print a few pages in both black and color at least once per week in order to keep the ink flowing and prevent clogging.
    If the printer head nozzles are blocked or dried out you will need to dissolve the dried ink. An inkjet nozzle has a diameter of about 45 microns which is about 1/2 the width of a human hair. Normally you can clear up minor clogs and streaking by running the cleaning cycle found in your printer's software utility.

    Steps for Manually Cleaning thePrinter Head


    Step 1 - Remove the ink tanks and printer head. Remove the ink tanks from the printer head (tank holder) and seal them in a zip lock or other sealable plastic bag. Set them aside, preferably propped upright.
    Next remove the printer head (it snaps out). NOTE: You may want to wear latex gloves to help keep ink off your hands.

    Step 2 - Soak the printer head. There are multiple suggestions on ways to clean the printer head and all have some variation on the following:
    ·         Get a small, shallow pan and lay down a layer or two of paper towels in the bottom of the container to protect the printer head circuitry from contact damage.
    ·         Heat up (via microwave) enough purified/bottled water to cover the paper towels. You can also use a 50/50 mixture of ammonia and distilled water (about a pint will do). Heat the mixture in the microwave for about a minute or so - it should NOT be boiling.
    ·         Slowly pour the water or mixture over the paper towels so that you have approximately 1/2 inch of liquid in the bottom of the pan.
    ·         Set the printer head into the container on top of the towels. You should see ink 'bleeding' out. Move the print head to several different spots (about a minute each spot) and shake gently. This will dissolve the ink clogs.
    ·         If the printer head is badly clogged let it soak for 3 to 4 hours or overnight. You can move it slightly to a different spot every hour or so.


    Call Us +1-855-517-2433 (Toll Free)

    Thursday, 28 June 2012

    How to Install Canon Printers Without the Disks


    Canon printers are more commonly used for personal computers, as opposed to commercial use. These particular printers usually come with installation disks that are used to install the hardware's software drivers on the computer, but it's easy to misplace those disks over time. Luckily, the Canon support site provides software drivers for Canon printers, allowing users to install the software without the disks. 

    Solution

    1 .Go to the official Canon Global website in your computer's Internet browser.

    2 .Click the "Support <Drivers/Downloads>" tab along the left side of the Canon Global homepage. Select your region on the interactive map that appears on the right side of the tab options, and select the subregion where you are located.

    3 .Select your product type, and click "Printers & Multifunction" to begin searching for your Canon product type. Click the product series that relates to your Canon printer.

    4 .Scroll through the list of Canon printer models in the product series. Click the "Drivers & Software" link next to your Canon printer's thumbnail image. You will be redirected to the printer's product and overview page.

    5 .Scroll down the Canon printer's product and overview page to the Drivers and Downloads section of the page. Click the "Select Your Operating System" drop-down bar. Select the name of your operating system, and click the red arrow to retrieve the software driver for your system.


    Call Us +1-855-517-2433 (Toll Free)
    !-- Start Alexa Certify Javascript -->