Showing posts with label Canon Printing Problems. Show all posts
Showing posts with label Canon Printing Problems. Show all posts

Monday, 29 May 2017

How to Troubleshoot a Canon Photo Inkjet Printer



Canon USA has an excellent technical support page, but before you seek out their help tries troubleshooting your Canon Photo Inkjet Printer on your own. There are a few basic steps you can do to troubleshoot a Canon Photo Inkjet Printer.

Instructions




Make sure the printer is set up correctly. The printer must be plugged into the wall, powered on and connected to a computer to function properly.
 
 
Check for error messages. Occasionally, a printer will spell out what's wrong with it with a pop- up window. Check the status light on the printer too and read the manual to see what it means.
    Checkfor paper\. Make sure the paper is loaded correctly and is not jammed. Look over the manual to see how to clear paper jams without damaging your printer further.
     
     
    Run a self-test. Many printers have a self-test feature that will help you pinpoint the problems. Operations will vary, consult the manual.
     
     
    Run adriver test. This is done from the printer's software. Before you print, you have the option to enter "Printer Properties." From there, find a "Maintenance" or "Cleaning" tab. Here, you can run a test page.
     
     
    Look over the test page. Bars, uneven patterns and white spots indicate dirty printheads. Faded or missing colors means its time to change a cartridge.
     
     
    Clean and align printheads. This can be done from the same maintenance page from which you ran the test page.
     
     
    Replace cartridges. When ink runs low, its time to replace the cartridge. Take note of the part number written on the cartridge and buy one just like it.
     
     
    Reinstallthe drivers. Try uninstalling the drivers and reinstalling from the disc that came with the printer. Or look for patches and updates on the Canon Web site.

    Friday, 29 June 2012

    How to Manually Cleaning the Printer Head in Canon Printer


    Canon printers have a removable printer head that holds the ink cartridges. It is important to print a few pages in both black and color at least once per week in order to keep the ink flowing and prevent clogging.
    If the printer head nozzles are blocked or dried out you will need to dissolve the dried ink. An inkjet nozzle has a diameter of about 45 microns which is about 1/2 the width of a human hair. Normally you can clear up minor clogs and streaking by running the cleaning cycle found in your printer's software utility.

    Canon printers have a removable printer head that holds the ink cartridges. It is important to print a few pages in both black and color at least once per week in order to keep the ink flowing and prevent clogging.
    If the printer head nozzles are blocked or dried out you will need to dissolve the dried ink. An inkjet nozzle has a diameter of about 45 microns which is about 1/2 the width of a human hair. Normally you can clear up minor clogs and streaking by running the cleaning cycle found in your printer's software utility.

    Steps for Manually Cleaning thePrinter Head


    Step 1 - Remove the ink tanks and printer head. Remove the ink tanks from the printer head (tank holder) and seal them in a zip lock or other sealable plastic bag. Set them aside, preferably propped upright.
    Next remove the printer head (it snaps out). NOTE: You may want to wear latex gloves to help keep ink off your hands.

    Step 2 - Soak the printer head. There are multiple suggestions on ways to clean the printer head and all have some variation on the following:
    ·         Get a small, shallow pan and lay down a layer or two of paper towels in the bottom of the container to protect the printer head circuitry from contact damage.
    ·         Heat up (via microwave) enough purified/bottled water to cover the paper towels. You can also use a 50/50 mixture of ammonia and distilled water (about a pint will do). Heat the mixture in the microwave for about a minute or so - it should NOT be boiling.
    ·         Slowly pour the water or mixture over the paper towels so that you have approximately 1/2 inch of liquid in the bottom of the pan.
    ·         Set the printer head into the container on top of the towels. You should see ink 'bleeding' out. Move the print head to several different spots (about a minute each spot) and shake gently. This will dissolve the ink clogs.
    ·         If the printer head is badly clogged let it soak for 3 to 4 hours or overnight. You can move it slightly to a different spot every hour or so.


    Call Us +1-855-517-2433 (Toll Free)

    Thursday, 10 May 2012

    How to Receive a Fax on a Canon Pixma Multifunction Printe


    ·         How to Receive a Fax on a Canon Pixma Multifunction Printer
    multifunction printer for Windows and Mac systems, the Canon Pixma accepts documents directly from your computer as well as digital photos from a memory card or microdrive. The plain-paper printer also lets you scan and fax documents to a stand-alone fax machines and other computers. Canon Pixma's fax component is accessible through the device's control panel. Before accepting faxes from another fax machine or computer, you must manually select the "receive fax" mode on the printer and specify the type of receiving mode you want the fax/printer to use

    Turn on your Cannon Pixma by pressing the "ON/OFF" button on the printer's control panel.
    ·         2
    Press the "FAX" button on the control panel, then the "Menu" button. The "Fax menu" will appear on your printer's display. Press the right or left arrow button to select "Receive Mode settings."
    ·         3
    Press the up or down arrow button to select a receive mode:
    "Fax priority mode" for receiving faxes and sometimes voice telephone calls with the printer;
    "Fax only mode" for receiving faxes only with the printer. Use this setting if your Cannon Pixma is on a dedicated phone line and no voice calls are received on the phone line;
    "DRPD" for a phone line that contains a ring pattern detection service for voice calls and fax calls;
    or "Tel priority mode" for receiving mainly voice calls on this telephone line and only sometimes faxes.
    ·         4
    Press the "OK" button to accept the receive mode. Press the "Back" button to exit the "Fax menu." The word "Standby" will appear next to the wording "Status:" on your printer's display panel, indicating that your Cannon Pixma is ready to receive faxes.
    ·         5
    Press the "FAX" button on the control panel, then the "Menu" button. The "Fax menu" will appear on your printer's display.
    ·         6
    Press the right or left arrow button to select "Maintenance/settings. Press the "OK" button. The "Maintenance/settings" menu will appear on the display. Press the right or left arrow button to select "Device settings," then press the "OK" button.
    ·         7
    Press the right or left arrow button to select "FAX settings. Press the "OK" button. Press the right or left arrow button to select "RX settings," then press the "OK" button.
    ·         8
    Press the up or down arrow button to select "Incoming ring," if using the "Fax priority mode" or "Fax only mode." Or select "DRPD: Set FAX ring pat," if using the "DRPD" mode.
    Press the "OK" button.
    ·         9
    Press the up or down arrow button to select "Double Ring," "Short-short-long," "Short-long-short" or "Other ring type." Press the "OK" button to accept the ring pattern.
    Press the "Back" button to exit the "Fax menu.
    !-- Start Alexa Certify Javascript -->